Home > Car Brake Disc >

High Quality Performance Brake Discs And Brake Drum Car Disk Braking For VOLVO

Product Categories

Car Brake Pads [236]
Electronic Control Unit [156]
Car Spark Plug [57]
Automatic Gear Shift [98]
Automobile Pedal [132]
Car Shock Absorber [57]
Car Bumper Grille [49]
Potting Glue [20]
Switch For Car [11]
Car Brake Disc [31]
Car Ignition Coil [22]
Car Rims Wheels [23]

Chongqing Aorun Industrial Co., Ltd.

Contact Now

High Quality Performance Brake Discs And Brake Drum Car Disk Braking For VOLVO

Ask Lasest Price
Brand Name :	Aorun
Model Number :	Aorun
Price :	Negotiable
Payment Terms :	L/C, D/A, D/P, T/T,
Supply Ability :	100000kg per month
Delivery Time :	5-8 work days

Add to Cart

Product Details
Company Profile

High Quality Performance Brake Discs And Brake Drum Car Disk Braking For VOLVO

Factory Wholesale High Quality Paint For Steel Anti Corrosion Paint Coating

Quick Detail:

Name	Art resin 9437	Usage	Building Coating, Floor coating
Type	BPA	Function	Anti-corrosion, beautiful, anti-yellowing, transparent, non-toxic and harmless

Description:

This single component product is mainly prepared by acrylic resin,chlorinated plasticizer, pigments, fillers, solvent,etc.
This two-component product is mainly prepared by aliphatic acrylic polyurethane resin, and anti-rust pigments.

Advantages:

1. Dustproof, wear resistant, pressure resistant, chemical resistant.
2. Easy to clean, quick construction and easy maintenance.
3.Environmentally friendlynon-toxic, no odor (After the paint is dried for 12 hours).

Specification:

Items	Units/conditions	Technical Data
Viscosity	Shore-D	80-85
Volume resistivity	25℃/ Ω./ cm	4.3x1015
Surface resistivity	25℃/ Ω.	2.6x1014
Dielectric strength	25℃ KV/MM	25
Coefficient of linear expansion	CM/K	<6.1x10-5
Glass transition temperature	℃	>90
Temperature resistant	℃	-60~120

The above performance data is typical data measured in a laboratory environment

with a temperature of 25°C and a humidity of 70%. It is for customer reference only

Operative method and tips:

1. Working environment: Please keep the plastic container clean. A, B components are strictly according to the weight ratio, accurately weighed, and stirit evenly along the inner wall of the container clockwise until it is used for 3-5 minutes.

2. According to the operating time and amount of glue deployment, to avoid waste. When the temperature is lower than 15 ° C, please pre-heat the A glue to 30 ° C and then adjust the rubber, easy to operate (low temperature, A glue will thicken ); After use must seal the lid,to avoid the product due to moisture absorption scrapped.

3. When the relative humidity is more than 85%, the surface of the cured product can easily absorb the moisture in the air to form a whitemist.Therefore,when the relative humidity is more than 85%, it is not suitable for room temperature curing. It is recommended to use the heating and curing.
4. The lid must be sealed after use to avoid the product being scrapped due to moisture absorption.

Application :

Suitable for thousands of ship bottoms, steel pillars of ballast water tank wharf, offshore oil drilling platforms, hydraulic
steel gates, mine steel supports, pipelines, tap water diversion for municipal construction, water pipelines, gas tanks,
industrial circulating water systems, and industrial sewage treatment Metal anti-corrosion, anti-corrosion and waterproof of the protective layer of urban heating pipe network and other corrosive environment steel and components, wood products, cement products, etc. for long-term anti-corrosion.

FAQ:

1.How can you prove that you are a paint manufacturer rather than a trading company?
welcome to visit our factory at any time.
2.How about the price ?
We can offer the best wholesale price which depend on the quantity of the order.
3.I need to make sure the quality and the color .
Our pleasure!We can offer the liquid Free sample for you to test and color chart.
4.If the product is not ideal, what can we do?
We have perfect after-sales service to help to complete the construction smoothly.
Even if there are any unexpected things in your order, we will assist to solve them.
5.What's your MOQ (min order quantity),production period and delivery time?
Our MOQ is 200Kg. We accept mixed order and the production period and delivery time are 7-10 days.
6.I want to put my Logo on the packing .
We can accept the OEM, waiting for your details requirement.

Packaging:

We offer different size of packaging, 5kg buckets and 20kg buckets are normal size. Customized

Company Display:

Product Tags:


*From:	Your email address is incorrect!
*To:	Chongqing Aorun Industrial Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!